Tesla-Lights

Precautions for the Use and Maintenance of Car Lights

Maintaining car bulbs is an important measure to ensure the normal operation of the vehicle lighting system, which helps to improve driving safety at night or in bad weather conditions.

  1. Use high-quality bulbs

It is very important to choose bulbs of reliable quality. High-quality bulbs not only have a long life, but also have sufficient brightness, concentrated focus, long range, and better lighting effect. Inferior bulbs have a short life and may cause unstable lighting due to quality problems, posing a safety hazard16.

Xenon Light Bulbs
  1. Replace bulbs regularly

As consumables, bulbs also have a service life. Generally, the brightness of the bulb will decrease after the car has traveled 50,000 kilometers or used for 2 years18. When the bulb begins to dim or the brightness is uneven, it should be replaced in time to ensure the lighting effect and driving safety.

  1. Clean the lampshade

Clean the car lampshade frequently to remove dust, dirt and other impurities on it. This not only beautifies the appearance of the vehicle, but more importantly, ensures that the lighting effect of the headlights is not affected16.

  1. Avoid moisture from entering

When cleaning the engine compartment, be careful not to let moisture remain in the lampshade, because as the engine temperature rises, the moisture may turn into water droplets and enter the headlights, causing the headlights to short-circuit and shorten their service life16.

LED-LIGHT-BULBS
  1. Repair lampshade cracks in time

If you find cracks in the headlight lampshade, you should repair or replace it in time, because cracks will allow air to enter the bulb, causing the bulb to malfunction and prevent it from working properly16.

  1. Avoid direct contact when replacing bulbs

When replacing bulbs, never touch the glass part of the bulb directly with your hands, because the grease on your fingers may cause the bulb to heat unevenly when heated, thereby reducing its service life16. You can wear gloves or wrap the bulb with a paper towel to operate.

  1. Adjust the headlights by yourself

If the position of the headlight beam deviates, you can adjust the position of the headlight by yourself according to the instructions in the vehicle manual to ensure that the beam is correctly illuminated and improve the driving vision18.

  1. Check the sealing of the lamp

Ensure that the lamp is well sealed to prevent moisture from entering the interior of the lamp, causing the bulb to short-circuit or damage3. If there is a problem with the sealing of the lamp, it should be repaired or replaced in time.

LED-BACK-UP-LIGHT-BULBS
  1. Avoid using inferior bulbs

Inferior bulbs not only have a short service life, but also may pose safety hazards, such as insufficient brightness and poor focus. Using inferior bulbs may also cause water to enter the lamp, causing dangers such as short circuits9.

Through the above measures, you can effectively extend the service life of car bulbs and ensure driving safety at night or in bad weather. If you encounter difficulties during maintenance, it is recommended to seek help from professionals.

In fact, every car light bulb has its own service life. As long as you maintain good driving habits, I believe that every light bulb of qualified quality will live up to its mission.

Back to blog

Leave a comment

Please note, comments need to be approved before they are published.